LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Automatic Transaxle - Overhaul [Ja5EL]) >> Reverse Clutch And High Clutch Disassembly >> Snap Ring Disassembly Note

Snap Ring Disassembly Note

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Depress the spring retainer only enough to remove the snap ring. Overpressing will damage the retainer component edges.
  1. Install the SSTs  in the clutch drum as shown.
  2. Compress the spring and retainer.
  3. Remove the snap ring.
    Fig 1: Removing Snap Ring
    G02291530Courtesy of MAZDA MOTORS CORP.
  4. Remove the SSTs  .
scientia non olet · About LEMON Manuals