Clutch Clearance

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Using thickness gauge, measure clearance between the retaining plate and the snap ring.
- If not as specified, replace parts where necessary.
- If the specified clearance is exceeded, replace all clutch plates with new ones. Then, select a suitable retaining plate so that the specified clearance is obtained.
Fig 1: Measure Clutch Clearance
Courtesy of MAZDA MOTORS CORP.

Clearance

1.8-2.2 mm {0.07-0.09 in}

Fig 2: Identifying Available Retaining Plate Sizes
Courtesy of MAZDA MOTORS CORP.