Drive Plate Inspection
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the facing thickness in three places, and determine the average of the three readings.
- If not within the specification, replace the drive plates.
Thickness
Minimum: 1.7 mm {0.067 in}