2-4 Brake Piston Disassembly Note
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Using an air gun, blow air into circuit to blow out the 2-4 brake piston as shown.
- Remove the seal ring and O-ring from the 2-4 brake piston.
WARNING:
Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eye wear whenever using compressed air.