LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Engine Mechanical (Service Information)) >> Engine Removal/Installation >> Oil Hose Removal Note

Oil Hose Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clip as shown in the figure and disconnect the oil pipe. See Fig 1.
    CAUTION:
    • Catch the remaining engine oil in the oil cooler using a plate pipe to prevent spillage.
    Fig 1: Removing Hose Clip
    G01345647Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals