LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Manual Transaxle Clutch) >> General Procedures (Clutch)

General Procedures (Clutch)

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If fluid does get on painted surfaces, wipe it off immediately.
NOTE:
  • If any hydraulic related parts of the clutch system are removed during the procedure, add brake fluid, bleed the system and inspect for leakage after the procedure has been completed.
  1. Remove the clutch pipe using the SST  (49 0259 770B).
  2. Install the clutch pipe using a torque wrench and the SST  (49 0259 770B).
scientia non olet · About LEMON Manuals