Clutch Disengagement Point Inspection
WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine.
- Without depressing the clutch pedal, move the shift lever slowly to the reverse position until gear noise is heard and hold the lever in that position.
- Slowly depress the clutch pedal and hold at the point where the gear noise stops (clutch disengagement point).
- Measure distance A (from pedal not depressed to clutch disengagement point) and verify that it is within the specification.
Courtesy of MAZDA MOTORS CORP.
Clutch disengagement stroke (Reference value)
A: 111.8 mm {4.402 in}