LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Automatic Transmission [Service, Removal & Installation)) >> Vehicle Speed Sensor (VSS) Inspection >> Visual Inspection

Visual Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the VSS. (See VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION .)
  2. Make sure that the VSS is free of any metal shavings or particles.
    • If there is any malfunction, clean them off.
  3. Install the VSS. (See VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals