LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Automatic Transmission [Service, Removal & Installation)) >> Oil Cooler Disassembly/Assembly >> Drive Plate Removal/Installation

Drive Plate Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission (See AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION .)
  2. Remove in the order indicated. See Fig 1.
    Fig 1: Removal Order Of Drive Plate
    G01346906Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Drive Plate
    G01346907Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals