Vanity Mirror Illumination Bulb Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the sunvisor.
Insert a tape-wrapped flathead screwdriver into the service hole.
Twist the flathead screwdriver to remove the lens.

Fig 1: Removing Vanity Mirror Lens
Courtesy of MAZDA MOTORS CORP.
Remove the vanity mirror illumination bulb.

Fig 2: Removing Vanity Mirror Illumination Bulb
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.