LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Engine Mechanical (Service Information)) >> Front Oil Seal Replacement >> Crankshaft Pulley Installation Note

Crankshaft Pulley Installation Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Seal the keyway in the crankshaft pulley using the silicone sealant.
  2. Install the crankshaft pulley using the SST  and the crankshaft pulley lock bolt washer.
    Fig 1: Installing Crankshaft Pulley
    G00993561Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals