LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Engine Mechanical (Service Information)) >> Engine Removal/Installation >> No. Engine Mount Through Bolt Removal Note

No. Engine Mount Through Bolt Removal Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the through bolt which mounts the No. 1 engine mount rubber and joint bracket. Do not remove the No. 1 engine mount rubber from the vehicle.
  2. Before removing the No. 1 engine joint bracket, set the tool under the transaxle.
    Fig 1: Identifying Tool For Transaxle Support
    G00993570Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals