LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Engine Mechanical (Service Information)) >> Engine Removal/Installation >> No. 4 Engine Mount Rubber Removal Note

No. 4 Engine Mount Rubber Removal Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the No.4 engine mount rubber installation bolt, but do not remove the mount from the vehicle.
  2. Remove the through bolt which mounts the mount rubber and joint bracket.
scientia non olet · About LEMON Manuals