LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Engine Mechanical (Service Information)) >> Cylinder Head Gasket Replacement >> Water Bypass Tube Removal Note

Water Bypass Tube Removal Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the water bypass tube installation stud bolt and bolt and disconnect the water bypass tube from the cylinder head.
    Fig 1: Removing Water Bypass Tube Stud Bolt & Bolt
    G00993545Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals