LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Power Steering System) >> Steering Gear And Linkage Assembly >> Seal Ring Assembly Note

Seal Ring Assembly Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the seal rings to the pinion shaft component.
  2. Pull the SST  over the pinion shaft component from both directions. This will correctly shape the seal ring.
    Fig 1: Pulling Special Tool Over Pinion Shaft Component
    G00998356Courtesy of MAZDA MOTORS CORP.
  3. Install the oil seal from the pinion shaft gear side.
scientia non olet · About LEMON Manuals