LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Power Steering System) >> Steering Gear And Linkage Assembly >> Oil Seal (Gear Housing) Assembly Note

Oil Seal (Gear Housing) Assembly Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil seal in the rack housing using the SSTs  .
  2. After installation, inspect for noise by shaking the gear housing.
    • If there is noise, the seal is not properly installed, Reinstall it.
      Fig 1: Installing Oil Seal In Rack Housing
      G00998347Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals