Antenna Feeder Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the connection between the antenna and the antenna feeder.
Verify that there is no continuity between the antenna feeder terminals A and B using an ohmmeter.
- If not as specified, replace the antenna feeder.
Inspect for continuity between the antenna feeder terminals using an ohmmeter.
- If not as specified, replace the antenna feeder.
Fig 1: Antenna Feeder Continuity Specifications
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Antenna Feeder Terminals
Courtesy of MAZDA MOTORS CORP.