Windshield Washer Hose Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the hood insulator.
Partially peel off the right side mud guard.
Remove in the order indicated in the figures.

Fig 1: Removing/Installing Windshield Washer Hose (Legend)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing/Installing Windshield Washer Hose
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.