Shift-Lock Release Lever Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch to OFF position.
Verify that the selector lever is in P position.
Without the brake pedal depressed, verify that the selector lever cannot be shifted from P position.
Remove the cover.
Push down the shift-lock release lever using fingers.

Fig 1: Locating Shift-Lock Release Lever
Courtesy of MAZDA MOTORS CORP.
Verify that the selector lever can be shifted from P position.
- If not as specified, inspect and repair as necessary.