LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Automatic Transaxle [Shift Mechanism]) >> Key Interlock Solenoid Inspection >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the key interlock solenoid connector.
  4. Inspect for continuity between terminals A and B.
    • If there is no continuity, replace the key cylinder.
    Fig 1: Identifying Key Interlock Solenoid Connector Terminals
    G00993735Courtesy of MAZDA MOTORS CORP.
  5. Connect the key interlock solenoid connector.
  6. Install the column cover.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals