Resistance Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Disconnect the key interlock resistor connector.
Inspect for resistance between terminals A and B.
- If not correct, replace the key interlock resistor. (See KEY INTERLOCK RESISTOR REMOVAL/INSTALLATION .)
Fig 1: Identifying Key Interlock Resistor Connector Terminals
Courtesy of MAZDA MOTORS CORP.

Resistance

6.65-7.35 ohms
Connect the key interlock resistor connector.
Connect the negative battery cable.