LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment (Front) >> Millenia

Camber Adjustment (Front): Millenia

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Camber is adjusted by turning adjusting cam bolt at upper lateral link. Loosen left and right adjusting cam lock nuts. To increase camber on left side, turn adjusting cam bolt clockwise. To decrease camber on left side, turn adjusting cam bolt counterclockwise.
  2. To increase camber on right side, turn adjusting cam bolt counterclockwise. To decrease camber on right side, turn adjusting cam bolt clockwise. Tighten lock nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals