LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment (Front) >> Miata

Camber Adjustment (Front): Miata

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Adjust castor before adjusting front camber.
  1. Camber is adjusted by turning front and rear adjusting cam bolts at lower control arm. Loosen left and right cam adjusting lock nuts. To increase camber on left side, turn front adjusting cam bolt counterclockwise or rear adjusting cam bolt clockwise. To decrease camber on left side, turn front adjusting cam bolt clockwise or rear adjusting cam bolt counterclockwise.
  2. To increase camber on right side, turn front adjusting cam bolt clockwise or rear adjusting cam bolt counterclockwise. To decrease camber on right side, turn front adjusting cam bolt counterclockwise or rear adjusting cam bolt clockwise. Tighten lock nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals