LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Emission System) >> Evaporative Emission (EVAP) Control System Component Removal/Installation >> Engine Room Side

Engine Room Side

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the rear of the vehicle and support it with safety stands.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: Removing/Installing EVAP Control System Components (Engine Room Side)
    G00993690Courtesy of MAZDA MOTORS CORP.