Cooling Fan Motor Inspection
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the battery is fully charged.
- Disconnect the fan control module connector (2 terminals.)
- Connect battery voltage and an ammeter to the fan control module connector on fan motor side (2 terminals).
- Perform the same procedure as step 2 for the condenser fan motor.
- Verify that the cooling fan motor operates smoothly at the standard current draw.
- If not as specified, replace the cooling fan motor.
Standard Current
12.0-15.0 (A) [12 V]