Power Sliding Door (PSD) Rear Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the PSD rear switch.
Inspect for continuity between the PSD rear switch terminals using an ohmmeter.
- If not as specified, replace the PSD rear switch.
  
  Fig 1: Power Sliding Door Rear Switch Continuity Table
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying Power Sliding Door Rear Switch Terminals Connection
  Courtesy of MAZDA MOTORS CORP.