LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Servicing - A/T) >> Adjustments >> Transmission Range Sensor/Switch >> Millenia (With LA4A-EL Transmission)

Millenia (With LA4A-EL Transmission)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place gearshift lever in Neutral. Loosen transmission range switch mounting bolts at transmission. Rotate transmission range switch and insert a 5/32" alignment pin. Tighten transmission range switch mounting bolts to specification. See TORQUE SPECIFICATIONS . Remove alignment pin.
  2. Connect ohmmeter between terminals "A" and "H". See Figure. If continuity does not exist, replace transmission range switch. Install selector rod to manual shaft lever.
scientia non olet · About LEMON Manuals