Millenia & 626 (With GF4A-EL Transmission)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove air cleaner assembly. Disconnect selector cable. Rotate manual shaft to Neutral position. Disconnect transmission range switch connector. Loosen transmission range switch mounting bolts at transmission. Connect ohmmeter between terminals "A" and "H". See Figure. Adjust switch until continuity exists. Tighten transmission range switch mounting bolts to specification. See TORQUE SPECIFICATIONS . Verify transmission range switch and selector lever range position are aligned. Connect transmission range switch connector, and selector cable. Install air cleaner assembly. Connect negative battery cable.