Pistons, Piston Pins & Piston Rings Specifications
WARNING: This page is about a different car, the 2001 Mazda MPV and 2000 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
PISTONS, PINS & RINGS
| Application | In. (mm) | |||||
|---|---|---|---|---|---|---|
| Pistons | ||||||
| Clearance | .0004-.0008 (.010-.020) | |||||
| Diameter (1) | ||||||
| Grade 1 | 3.2138-3.2145 (81.630-81.650) | |||||
| Grade 2 | 3.2149-3.2150 (81.638-81.662) | |||||
| Grade 3 | 3.2146-3.2153 (81.650-81.670) | |||||
| Pins | ||||||
| Diameter | .82721-82728 (21.011-21.013) | |||||
| Piston Fit | .00008-.00035 (.002-.009) | |||||
| Rod Fit | ||||||
| Standard | .00016-.00078 (.004-.020) | |||||
| Maximum | .0013 (.035) | |||||
| Rings | ||||||
| No. 1 | ||||||
| End Gap | ||||||
| Standard | .004-.009 (.10-.25) | |||||
| Maximum | .019 (.50) | |||||
| Side Clearance | ||||||
| Standard | .0016-.0029 (.040-.075) | |||||
| Maximum | .004 (.10) | |||||
| No. 2 | ||||||
| End Gap | ||||||
| Standard | .011-.016 (.27-.42) | |||||
| Maximum | .025 (.65) | |||||
| Side Clearance | ||||||
| Standard | .0016-.0033 (.040-.085) | |||||
| Maximum | .0039 (.10) | |||||
| No. 3 (Oil) | ||||||
| End Gap | ||||||
| Standard | .006-.025 (.15-.65) | |||||
| Maximum | .035 (.90) | |||||
|
||||||