LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Mechanical (Service Information L3)) >> Cylinder Head Gasket Replacement >> Camshaft Removal Note

Camshaft Removal Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The cylinder head and the camshaft caps are numbered to be reassembled in their original position correctly. When removed, keep the caps with the cylinder head they were removed from. Do not mix the caps.
  1. Loosen the camshaft cap bolts in two or three steps in the order shown in the figure.
Fig 1: Removal Sequence Of Camshaft Cap Bolts
G01025019Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals