LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Mechanical (Service Information AJ)) >> Cylinder Head Gasket Replacement >> Water Bypass Tube Removal Note

Water Bypass Tube Removal Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the water bypass tube installation stud bolt and bolt, and disconnect the water bypass tube from the cylinder head.
Fig 1: Locating Water Bypass Tube Stud & Bolt
G01052324Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals