High-Mount Brake Light Removal/Installation [5HB, WGN]: 5HB

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the liftgate lower trim.
Remove in the order indicated in the illustration.
Install in the reverse order of removal.

Fig 1: Removal Order Of High-Mount Brake Light - (5HB)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing/Installing High-Mount Brake Light - (5HB)

Courtesy of MAZDA MOTORS CORP.