Cargo Compartment Light Switch Inspection [5HB, WGN]

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the liftgate lower trim.
Disconnect the cargo compartment light switch connector.
Inspect for continuity between the cargo compartment light switch terminals using an ohmmeter.

If not as specified, replace the liftgate lock.

Fig 1: Cargo Compartment Light Switch Terminals Continuity Table

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Cargo Compartment Light Switch Terminals Connection

Courtesy of MAZDA MOTORS CORP.