Open Circuit

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
- EGR valve terminal E (harness-side) and PCM terminal 4E
- EGR valve terminal A (harness-side) and PCM terminal 4H
- EGR valve terminal B (harness-side) and PCM terminal 4K
- EGR valve terminal F (harness-side) and PCM terminal 4N
- EGR valve terminal C or D (harness-side) and main relay terminal C (harness-side)