Section 14 (Manual A/C-Heater Systems - Tribute): Specifications

WARNING: This page is about a different car, the 2001 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

SPECIFICATIONS

Application

Specification

Compressor Type

Ford FS-10 10-Cyl.

Compressor Belt Deflection ⁽¹⁾

Compressor Oil Capacity ⁽²⁾

9.0 ozs.

Refrigerant (R-134a) Capacity

39.2 ozs.

System Operating Pressures ⁽³⁾

High Side

125-225 psi (9.1-15.8 kg/cm² )

Low Side

24-45 psi (1.7-3.2 kg/cm² )

⁽¹⁾	Belt tension is automatically adjusted by belt tensioner. Tension indicator should be within specified marks.

⁽²⁾	Use PAG compressor oil.

⁽³⁾	Specification is with ambient temperature at 80°F (27°C).