A/C Clutch Cycling Switch
WARNING: This page is about a different car, the 2001 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
A/C clutch cycling switch is mounted on a Schrader valve-type fitting on top of accumulator-drier. Electrical contacts inside A/C clutch cycling switch are normally open when pressure is 22-28 psi (1.5-2.0 kg/cm2 ). Contacts close and energize compressor clutch when low-side pressure reaches 40-47 psi (2.8-3.3 kg/cm2 ). When working properly, A/C clutch cycling switch maintains evaporator core temperature just above freezing.