LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (General Procedures (Steering System)) >> Precaution (Steering) >> Suspension Arm Removal/Installation

Suspension Arm Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten any part of the suspension that uses rubber bushings only after vehicle has been lowered to the ground and unloaded.
NOTE:
  • Unloaded: Fuel tank is full. Engine coolant and engine oil are at specified level. Spare tire, jack, and tools are in designated position.
scientia non olet · About LEMON Manuals