LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Interior Trim) >> C-Pillar Trim Removal/Installation

C-Pillar Trim Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn over the seaming welt.
  2. Remove the rear package trim. See REAR PACKAGE TRIM REMOVAL/INSTALLATION  .
  3. Remove the lower anchor of the rear seat belt.
  4. Pull the C-pillar trim to disengage clips A and pin B from the body.
  5. Pull the C-pillar trim upward to disengage hook C from the body.
    Fig 1: Removing/Installing C-Pillar Trim
    G01135836Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals