B-Pillar Upper Trim Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Remove the upper anchor of the front seat belt.
Remove the B-pillar lower trim. See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION .
Turn over the seaming welt.
Pull the B-pillar upper trim to disengage clip and pin A from the body.
Pull the B-pillar upper trim upward to disengage hooks B from the body.

Fig 1: Removing/Installing B-Pillar Upper Trim
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.