A-Pillar Trim Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Turn over the seaming welt.
Pull the A-pillar trim to disengage clips A and pin B from the body.
Pull the A-pillar trim upward to disengage hook C from the body.
Pull the A-pillar trim upward to disengage hook D from the dashboard.

Fig 1: Removing/Installing A-Pillar Trim
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.