LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Power Steering) >> Power Steering System Inspection >> Tie Rod Articulation Torque Test

Tie Rod Articulation Torque Test

WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This check may be done with the steering gear on or off the vehicle.
  1. Disconnect the tie rod end from the front wheel spindle. See STEERING GEAR REMOVAL/INSTALLATION .
  2. Move the front wheel spindle tie rod back and forth three times.
  3. Hook Spring Scale 211-034 (T74P-3504-4) or equivalent over the tie rod end or the threaded portion of the tie rod and measure the force required to move the tie rod. Refer to Tie Rod Articulation Torque. See SPECIFICATIONS .
  4. If the force required to move the spindle does not meet the specifications, replace the tie rod. See STEERING GEAR REMOVAL/INSTALLATION .
scientia non olet · About LEMON Manuals