Power Steering Hose Removal/Installation: Installation

WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

When connecting a fitting with a seal ring, the ring must be replaced.
1. Use Seal Replacer Set 211-D027 (D90P-3517-A) or equivalent to install the return line connector seal and the pressure line connector seal.
Fig 1: Installing Return Line Connector Seal
Courtesy of MAZDA MOTORS CORP.

Tightening Torque

48 N.m {4.9 kgf.m, 35 ft.lbf}
Fill and leak check the system.