LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Power Rack & Pinion) >> Engine Speed Sensing Power Steering >> Steering Gear And Linkage Disassembly >> Tie-Rod End Boot Disassembly Note

Tie-Rod End Boot Disassembly Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the tie-rod end in a vise.
  2. Place a chisel against the boot and hold it at the angle shown.
  3. Remove the boot by tapping it with a hammer.
Fig 1: Removing Tie Rod End Boot
G01197898Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals