LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Power Rack & Pinion) >> Engine Speed Sensing Power Steering >> Steering Gear And Linkage Assembly >> Housing Cover Assembly Note

Housing Cover Assembly Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to apply too much sealant.
  1. Apply sealant to the threads of the housing cover.
  2. Mount the housing cover.

    Tightening Torque 

    49-69 N.m (5.0-7.0 kgf.m, 37-50 ft.lbf) 

  3. Caulk one point of the housing cover and gear housing.
scientia non olet · About LEMON Manuals