LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Power Rack & Pinion) >> Engine Speed Sensing Power Steering >> Steering Gear And Linkage Assembly >> Adjusting Cover Assembly Note

Adjusting Cover Assembly Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply sealant to the threads of the adjusting cover.
  2. Tighten the adjusting cover to a torque of 20-29 N.m (2.0-3.0 kgf.m, 15-21 ft.lbf)  using the SSTs  .
  3. Loosen the adjusting cover about 25-30°  .
    Fig 1: Torquing Adjusting Cover
    G01197930Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals