LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Exterior/Interior Trim) >> Trim >> Head Impact Pad Removal/Installation

Head Impact Pad Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headliner. See HEADLINER REMOVAL/INSTALLATION .
  2. Remove the fastener (rear side only).
  3. Pull the head impact pad toward you, then disengage clips A and B from the body, and remove the head impact pad.
  4. Install in the reverse order of removal.
Fig 1: Removing Head Impact Pad
G01196584Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals