LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Axle Shafts - Front) >> Removal, Disassembly, Reassembly & Installation >> Fwd Axle Shaft >> Removal (Tribute)

Removal (Tribute)

WARNING: This page is about a different car, the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MPV, and 2001 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel. Apply brakes and remove axle shaft lock nut. Remove brake caliper, anchor plate and rotor. See Appropriate DISC & DRUM article in BRAKES.
  2. Remove nut from tie rod end. Using Tie Rod End Remover (211-105), separate tie rod end from steering knuckle. Remove lower control arm ball joint from steering knuckle. Using Front Hub Remover (205-D070), separate axle shaft from knuckle. Remove axle shaft assembly.
scientia non olet · About LEMON Manuals