LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Front Suspension System) >> Front Lower Arm >> Removal/Installation >> Upper Arm Ball Joint Removal Note

Upper Arm Ball Joint Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the bolts on the vehicle side.
  2. Disconnect the upper arm ball joint using the SST.
Fig 1: Removing Upper Arm Ball Joint
G00379011Courtesy of MAZDA MOTORS CORP.