LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Front Suspension System) >> Steering Gear And Linkage Removal/Installation >> Tie-Rod End Ball Joint Removal Note

Tie-Rod End Ball Joint Removal Note

WARNING: This page is about a different car, the 2004 Mazda MPV, 2003 Mazda MPV, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tie rod nut.
  2. Separate the tie-rod end from the steering knuckle using the SSTs.
Fig 1: Removing Tie-Rod End Ball Joint
G00375711Courtesy of MAZDA MOTORS CORP.