Water Inlet Tube Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

When replacing the cylinder block that has no water inlet tube, install the water inlet tube after applying sealant using the SST .

Thickness

2.0 mm {0.079 in}

Fig 1: Installing Water Inlet Tube
Courtesy of MAZDA MOTORS CORP.